{"product_id":"tankversiegelungs-set-krad-10l","title":"Tank sealing set KRAD 10L","description":"\u003ch5\u003eComplete set for the refurbishment of tanks up to 10L capacity\u003c\/h5\u003e\n\u003cp\u003eMaintain the condition and service life of your vehicle and preserve your fuel tank with the WAGNER tank sealing set consisting of the rust remover WAGNER RostFix and the one-component resin WAGNER TankFix!\u003c\/p\u003e\n\u003ch5\u003eThis set contains\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e175 ml WAGNER TankFix\u003c\/li\u003e\n\u003cli\u003e250 ml WAGNER RustFix\u003c\/li\u003e\n\u003cli\u003edetailed working instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eand is sufficient for the restoration of tanks with a capacity of up to 10 liters.\u003c\/p\u003e\n\u003ch5\u003eWAGNER RustFix\u003c\/h5\u003e\n\u003cp\u003estops rust immediately - and removes deep-seated layers of rust.\u003c\/p\u003e\n\u003cp\u003eAt the same time, the porous surface structure eaten away by corrosion is chemically healed - during treatment, a solid metal surface is created that can be painted, coated, tinned or even galvanized without any problems. Mechanical derusting is no longer necessary!\u003c\/p\u003e\n\u003cp\u003eThe dark gray layer (phosphating) that WAGNER RustFix leaves on iron and steel effectively protects metal surfaces against rust.\u003c\/p\u003e\n\u003cp\u003eTreatment with WAGNER RostFix considerably improves the rust protection of the metal and the adhesion of the final protective treatment. For non-ferrous metal surfaces such as aluminum or zinc sheet, WAGNER RostFix is suitable for pre-priming (etching) the bare surface. It is therefore also worth treating new, rust-free metals with WAGNER RostFix.\u003c\/p\u003e\n\u003ch5\u003eWAGNER TankFix\u003c\/h5\u003e\n\u003cp\u003eHigh-quality, transparent, ready-to-use fuel tank sealant for sealing and restoring tanks in need of renovation.\u003c\/p\u003e\n\u003cp\u003eWAGNER TankFix saves every tank by installing a protective inner tank. Even fuel tanks that already smell, weep or drip are usually 100% watertight again after sealing!\u003c\/p\u003e\n\u003cp\u003eUnlike most two-component sealants, WAGNER TankFix does not become brittle and permanently retains a minimum degree of flexibility. It therefore remains elastic and flexible after drying and can reliably compensate for the expansion and contraction of a metal tank caused by natural temperature fluctuations. In contrast to the brittle 2k coatings, this means that NO \"micro-cracks\" are formed which can be infiltrated by the fuel and therefore our tank sealant CANNOT flake off and even resists dents from minor accidents.\u003c\/p\u003e\n\u003cp\u003eThe water-like consistency and long working time of our tank sealing resin enable thorough and reliable work. This also gives you the security of coating, sealing and preserving the tank completely and without \"gaps\" with our resin.\u003c\/p\u003e\n\u003ch5\u003eArea of application\u003c\/h5\u003e\n\u003cp\u003eTanks with a capacity of up to 10 liters can be treated with this tank sealing set.\u003c\/p\u003e\n\u003cp\u003eTank interiors made of sheet metal, steel (including alloys), aluminum, stainless steel, copper, brass and plastics such as carbon, GRP, Kevlar, polyester or vinyl ester can be sealed.\u003c\/p\u003e\n\u003cp\u003eEven new tanks with flawless inner surfaces can be sealed with WAGNER TankFix, roughening is not necessary.\u003cbr\u003e\u003cem\u003e\u003cstrong\u003eWAGNER Tankfix cannot be used on tanks made of polyethylene or polypropylene\u003c\/strong\u003e\u003c\/em\u003e, as these materials cannot be permanently coated.\u003c\/p\u003e\n\u003ch5\u003eApplication \u0026amp; dosage\u003c\/h5\u003e\n\u003cp\u003eAfter the necessary preparatory work (derusting, degreasing), pour the required amount of transparent WAGNER TankFix into the tank depending on the tank size and shake it vigorously, then carefully swivel it out. The resin should completely wet all areas of the inner walls.\u003c\/p\u003e\n\u003cp\u003eAfter the first layer has dried and is no longer sticky (after approx. 12 - 24 hours), a second layer can be applied.\u003c\/p\u003e\n\u003cp\u003eThe coating is fully cured after approx. 7 to 8 days.\u003c\/p\u003e\n\u003cp\u003eBefore starting work, please read the instructions for tank sealing (available to download as a PDF below and enclosed with the set in paper form) carefully.\u003c\/p\u003e","brand":"Wagner Spezialschmierstoffe GmbH \u0026 Co. KG","offers":[{"title":"Default Title","offer_id":56265494495614,"sku":"071000","price":34.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/9384\/2814\/files\/071000-TankversiegelungsSet-10L-mit_Karton.jpg?v=1758121883","url":"https:\/\/www.classic-oil.com\/en\/products\/tankversiegelungs-set-krad-10l","provider":"Wagner Classic Oil","version":"1.0","type":"link"}